Map Out the Full Cost Picture

The biggest mistake in RFID budgeting is focusing solely on tag prices. Tags are just one line item. A complete cost model should cover five categories:

Tags and consumables. Unit costs vary widely. A passive UHF inlay for retail might sit below five pence, while a ruggedised on-metal tag for asset tracking could reach several pounds. Multiply by expected volume and factor in attrition rates for tags that get damaged or lost.

Readers and antennas. Fixed readers at dock doors, handheld readers for cycle counts, overhead readers for conveyor lines. Include mounting hardware, cabling, and any edge-computing devices needed at the read point.

Middleware and software. This is the layer that filters, deduplicates, and routes tag data into your existing systems. Some organisations use commercial RFID middleware platforms; others build lightweight connectors directly into their ERP or WMS. Either way, licence fees, hosting, and ongoing support belong in the model.

Integration. Connecting RFID event data to warehouse management, ERP, or point-of-sale systems is often the most underestimated cost. Budget for API development, data mapping, user acceptance testing, and a parallel-run period where old and new processes overlap.

Training and change management. Staff need to understand new workflows, how to handle exceptions when a tag fails to read, and how to interpret dashboard data. A rushed training phase leads to workarounds that erode ROI.

Quantify the Benefits

Hard savings are the easiest to defend. Calculate current labour hours spent on manual counts, barcode scanning, or searching for misplaced assets, then estimate the reduction RFID will deliver. In retail, inventory accuracy improvements from around 65 percent to above 95 percent are well documented and translate directly into fewer stockouts and markdowns.

Soft benefits matter too, but label them honestly. Faster receiving, improved compliance audit times, and better customer experience all have value. Assign conservative estimates and flag them as secondary gains rather than primary justification.

Calculate the Payback Period

A simple payback model works for most initial business cases. Divide total project cost by annual net benefit to find the number of years until the investment breaks even. Many RFID projects in logistics and retail achieve payback within 12 to 18 months. For asset tracking in healthcare or manufacturing, the timeline may stretch to two years but often comes with regulatory or safety benefits that carry weight beyond pure financials.

For larger deployments, consider a discounted cash flow approach that accounts for phased rollouts and scaling costs. A pilot phase covering one facility or product line keeps upfront risk low while generating real data to refine the model before full-scale commitment.

Present It as a Template

Structure your business case document with an executive summary, a cost breakdown table, a benefits summary with assumptions clearly stated, a payback timeline, and a risk register. Keep the language plain and the numbers auditable. Decision-makers trust a model they can stress-test over one that looks polished but hides its assumptions.

Building a business case for RFID is not about proving the technology works. That debate is long settled. It is about proving it works for your operation, at your scale, with your constraints. Get the cost categories right, quantify benefits conservatively, and let the numbers make the argument.

The post How to Build a Business Case for RFID first appeared on RFID News.

Working with solution provider Seuic Technologies, the chain has embedded RAIN RFID chips directly into towels, sheets and bathrobes. Housekeeping and laundry staff use the AUTOID UTouch 2-S handheld reader, built around Seuic’s E510 high-performance RAIN RFID module, to scan dozens of items in seconds rather than counting by hand.

For a luxury operator handling tens of thousands of linen items every day, the efficiency gain translates into measurable reductions in shrinkage, misplaced stock and reconciliation errors. Every scan is pushed into a centralised platform in real time, giving laundry managers, floor staff and procurement teams a single source of truth for where each item sits in the use, wash and return cycle.

Hotels have traditionally relied on handwritten logs and spreadsheet inventories to track textiles, a process notorious for slow throughput and missing data. When a bathrobe disappears or a towel fails to come back from the laundry, the cost is easy to underestimate until it is multiplied by hundreds of rooms and thousands of turns per year. RAIN RFID changes that equation by making each item individually identifiable without line-of-sight scanning, so a full trolley of laundry can be read in a single pass.

The Marriott deployment reflects a broader shift inside hospitality. Linen pooling, uniform management and minibar stock are all emerging as natural fits for UHF item-level tagging. Operators gain visibility of asset lifespans, can enforce wash-count limits before replacement, and can settle disputes with laundry partners using objective scan data rather than estimates.

Seuic’s AUTOID UTouch 2 series is positioned as a rugged field device for environments where readers have to survive knocks, moisture and long shifts. The E510 module inside the handheld is engineered for high read rates in cluttered metal and fabric environments, which matters in a hotel basement full of steel linen trolleys and tiled walls.

For the wider industry, the case study strengthens the argument that RAIN RFID has moved past pilot territory in hospitality. Luxury brands are typically cautious adopters of back-of-house technology because guest experience cannot be disrupted, so a production rollout at Marriott signals that the technology is now considered ready for premium operators.

The takeaway for hotel groups still evaluating linen tracking is straightforward. Manual counts are expensive in labour, slow in execution and unreliable in data quality. RAIN RFID removes all three limitations in one step and, on the numbers Marriott is reporting, repays the investment quickly.

The post Smart Hotel Operations enabled by RAIN RFID at Marriott International first appeared on RFID News.

The scale of the problem is significant. A typical 500-bed hospital processes between 3,000 and 5,000 kg of linen every day. Scrubs, bed sheets, surgical drapes, patient gowns, and staff uniforms all require different handling, washing temperatures, and tracking. Traditionally, staff relied on manual counting and paper-based systems to manage par levels, the minimum stock each unit needs to function. The result was frequent overstocking in some areas and shortages in others, with little visibility into where items actually were at any given time.

UHF RFID laundry tags, typically sewn into a hem or heat-sealed onto fabric, solve this by giving every textile item a unique digital identity. Each tag contains an EPC (Electronic Product Code) that links to a record in the hospital’s linen management system. As items pass through RFID-equipped collection points, laundry chutes, sorting stations, and delivery carts, the system automatically logs their location and status. Staff no longer need to count manually, and par levels can be maintained dynamically based on real usage data rather than estimates.

Infection control is where RFID delivers some of its most important benefits. Hospitals must ensure that soiled linen from isolation rooms or surgical suites is handled according to strict protocols. RFID readers at collection points can verify that contaminated items are routed to the correct wash cycle, with the right temperature, chemical concentration, and dwell time. The system creates an auditable trail for every item, which simplifies compliance reporting and reduces the risk of cross-contamination.

Cost savings are equally compelling. Linen shrinkage, the gap between what a hospital purchases and what remains in active circulation, has historically run as high as 30% annually in some facilities. Items go missing through hoarding, accidental disposal, or theft. Facilities that have deployed RFID tracking consistently report shrinkage reductions of 15% to 25%, translating directly into lower replacement spend. When a single surgical drape can cost over 20 pounds, those savings add up quickly across an entire hospital system.

The cost-per-wash-cycle picture also improves. With accurate data on how many times each item has been laundered, hospitals can retire textiles before they degrade to the point of failure, reducing rewash rates and extending the usable life of their stock. Some systems flag items that have exceeded their recommended wash count, ensuring patient-facing textiles always meet quality standards.

Modern UHF RFID laundry tags are designed to withstand industrial washing at temperatures above 75 degrees Celsius, tumble drying, ironing, and chemical treatment. Leading tag manufacturers now offer products rated for 200 or more wash cycles, making the per-use cost negligible compared to the efficiency gains.

For hospital procurement and facilities teams looking to justify the investment, the data speaks clearly. Reduced shrinkage, lower labour costs for counting and sorting, better infection control compliance, and optimised par levels all contribute to a return on investment that most facilities achieve within 12 to 18 months of deployment.

The post How RFID Transforms Hospital Linen and Uniform Management first appeared on RFID News.

One System to Replace the Patchwork

For many organisations, RFID workflows have long been a fragmented affair. Separate tools for tagging, printing, tracking and reporting create inefficiencies, introduce manual data entry errors, and leave gaps in asset visibility. Peacocks RFID Software is designed to address all of that directly, consolidating every step of the process into a single, integrated platform.

From initial field capture through to enterprise-level reporting, the software acts as a central hub for RFID operations. Rather than relying on a collection of disconnected tools, businesses now have a unified system that supports the full asset lifecycle.

Mobile App Built for the Field

The mobile application is designed specifically for Android devices and rugged mobile computers, making it well suited to demanding operational environments. Staff can scan and register assets, print and encode RFID tags, and carry out inspections or stocktake directly at the point of activity. There is no need to record notes manually and return to a desktop later. Tasks are completed in real time, in the field, which reduces the risk of transcription errors and frees up staff for higher-value work.

Offline functionality with automatic synchronisation ensures operations continue uninterrupted even without a live network connection, a critical feature for warehouses, remote sites, and industrial environments where connectivity can be unreliable.

Web Portal for Oversight and Governance

Alongside the mobile app, the companion web portal provides administrators and managers with the visibility and control needed to manage assets at scale. Features include location management, bulk data import, GPS-tagged scanning events, user administration, role-based access controls, and detailed reporting tools.

Together, the two components deliver operational agility in the field while maintaining full enterprise-wide governance. Audit trails, transaction logging, geolocation capture, and centralised cloud management round out the platform’s security and compliance capabilities.

Designed to Scale with Business Needs

George Pecchiar, Executive Director at Peacock Bros., explained the thinking behind the product: “Our new RFID Track and Trace Software was designed to replace the patchwork of tools and manual processes businesses have been relying on. By combining a mobile app for instant field capture with a web portal for oversight and reporting, it provides one connected system where assets can be registered, tracked and managed in real time. That means greater accuracy, visibility and efficiency than barcoding or disconnected solutions can offer.”

The platform is built to integrate with existing enterprise systems and supports standard login protocols, making adoption straightforward for IT teams. Automated check-in and check-out, real-time data processing, and intuitive dashboards help teams make faster, better-informed decisions without adding complexity to daily workflows.

Peacock Bros. has positioned the software as a flexible, future-ready solution that can be tailored to a wide range of industry use cases, from retail inventory management and healthcare asset tracking to logistics and field services. For businesses looking to move beyond barcoding or fragmented RFID setups, it represents a practical and scalable next step.

Organisations interested in learning more can contact Peacock Bros. directly at enquiries@peacocks.com.au.

Read more at https://www.peacocks.com.au/news/peacock-bros-launches-unified-rfid-software-to-transform-asset-management

The post Peacock Bros. Launches Unified RFID Software to Transform Asset Management first appeared on RFID News.

The programme uses passive UHF RAIN RFID tags applied directly to packages, paired with reader infrastructure installed across sorting hubs. Each tagged parcel triggers a read the moment it passes through a scan point, without the need for a worker to line up a barcode. That change eliminates one of the most stubborn bottlenecks in large scale parcel handling and removes a common source of missed scans that lead to delays and misroutes.

For UPS customers, the benefits show up in the details. Packages are logged automatically at induction, during sortation, at loading, and again when they leave a facility. Every one of those touch points feeds real time data back to tracking systems, so shippers and recipients see movement updates reflected more quickly and more accurately than before. The extra resolution helps retailers manage returns, reduces the volume of customer service queries, and gives operations teams earlier warning when something is off.

RAIN RFID is well suited to the job. The passive UHF tags are low cost, battery free, and can be read in bulk at high speed, which is a fit for an environment moving millions of packages through hubs each day. Readers can capture dozens of items simultaneously, a step change from one at a time barcode scanning. Because the tags do not need line of sight, packages can be oriented in any direction and still get picked up.

The data layer is where UPS expects the real transformation to show. Each scan creates a verifiable event that is tied to an individual parcel, which builds a complete chain of custody for every shipment. That kind of granular record supports better exception handling, smarter network planning, and more accurate service commitments, particularly for time sensitive freight. It also positions UPS to offer more advanced analytics products to enterprise shippers who increasingly want raw data they can plug into their own supply chain platforms.

Industry observers see the move as a meaningful signal for RFID more broadly. While retailers like Walmart have driven much of the recent RAIN RFID adoption through inventory mandates, the UPS programme extends the technology into the transit and logistics layer, where the operational gains compound with every handoff. The deployment demonstrates that RFID is no longer a pilot technology in logistics but an infrastructure investment with returns measured in reliability and throughput.

UPS has framed the rollout as part of a broader push to raise service standards across its network, and the early indications suggest the investment is paying off. With package volumes growing and customer expectations rising, the visibility delivered by RFID gives UPS a tangible advantage in an extremely competitive market, and sets a reference point that other carriers will find hard to ignore.

Read more at https://about.ups.com/mx/en/newsroom/press-releases/customer-first/ups-s-rfid-sensingtechnologytransformslogisticsindustry-givingcu.html

The post UPS’s RFID Technology Transforms Logistics Industry, Giving Customers Unprecedented Package Visibility and Reliability first appeared on RFID News.

The project brings together SAF-HOLLAND SE, a major trailer axle manufacturer, alongside Tageos, identytag GmbH and Winckel GmbH. Together they have embedded NFC technology directly into the hub caps of trailer axles, creating a durable link between physical components and their digital records.

At the heart of the solution is the Tageos EOS-920 NTAG213 inlay, a compact 20mm NFC tag with 144 bytes of user memory. The chip sits inside a specially designed label that is fixed to each axle hub cap, where it can survive the rough conditions of road transport and still deliver reliable reads when scanned.

Workshop technicians interact with the tags through SH-Connect, a dedicated app that opens up a full suite of services the moment a tag is scanned. From one interface, mechanics can order spare parts, pull up technical documentation, find the nearest authorised workshop and access training materials. The result is a faster, cleaner workflow that keeps trailers moving rather than stuck waiting for paperwork.

Before this rollout, technicians were often forced to hunt for QR codes tucked away in awkward spots beneath vehicles or inside inspection pits. Dirt, grease and damaged labels turned what should be a routine check into a time sink, and misreads led to ordering errors and avoidable downtime. NFC sidesteps these issues entirely because it does not rely on line of sight or a clean surface.

Felix Passia, Head of Sales at identytag, said the partnership “embodies the power of the RFID ecosystem” and creates “systems that don’t just track corporate assets: they generate valuable product information and intelligence.” His comment captures a broader shift in the industry, where tagged components are becoming active sources of operational data rather than passive identifiers.

The benefits stack up quickly. Fleet operators get unambiguous identification of every axle, immediate access to up to date product information, faster service turnarounds and lower spare parts errors. Because the tags can be retrofitted to existing axles and scanned with standard smartphones, there is no need for specialised readers or expensive new hardware. The move to NFC also cuts down on printed documentation, delivering a modest but welcome environmental win.

For Tageos, headquartered in Montpellier, France, the project reinforces its position in industrial NFC applications where durability and data density matter. For SAF-HOLLAND, it offers a clear differentiator in a competitive market and a practical answer to customer demand for smarter, connected components.

As trailers become more connected, expect the humble hub cap to keep doing more than its share of the work. NFC at the point of service is a small change with a surprisingly large ripple effect across the logistics chain.

Read more at https://www.tageos.com/en/why-tageos/news/news-details/smart-axles-revolutionize-trailer-maintenance.html

The post Tageos launch Smart Axles Revolutionise Trailer Maintenance first appeared on RFID News.

Passive RFID tags have no internal battery, which gives them a significant longevity advantage. In theory, a passive UHF or HF inlay sealed in stable conditions could function for 20 years or more. But real-world performance tells a more nuanced story. Environmental exposure, mechanical stress, and chemical contact all play a role in determining how long a tag will continue to deliver reliable reads.

Label Tags

Adhesive-backed RFID label tags are the most widely deployed form factor, commonly used in retail, logistics, and document tracking. Under normal indoor conditions, these tags typically last between 3 and 5 years. The limiting factor is rarely the IC or antenna. Instead, adhesive degradation, moisture ingress, and physical abrasion tend to reduce performance over time. In warehousing environments with temperature swings and dust, read range can drop noticeably within 18 to 24 months.

Hard Tags

Encapsulated in durable plastic or polycarbonate housings, hard tags are built for longevity. These are common in asset tracking, tool management, and reusable container programmes. Hard tags routinely survive 10 years or more, even in outdoor or semi-industrial environments. The rigid casing protects the antenna from flexing and shields the IC from moisture and impact. Some manufacturers warranty their hard tags for over 100,000 read cycles without measurable performance loss.

Laundry Tags

Laundry tags represent one of the most punishing use cases in RFID. Designed to withstand repeated wash cycles at temperatures up to 60 degrees Celsius, along with tumble drying, pressing, and chemical detergents, these tags are typically encased in flexible, heat-resistant polymers. Leading laundry tags from manufacturers like Datamars and HID are rated for 200 or more wash cycles. Field studies have shown consistent read performance beyond 300 cycles in commercial laundry operations, translating to a practical lifespan of 2 to 3 years in high-turnover textile rental services.

On-Metal Tags

Standard UHF tags fail when mounted directly on metal surfaces because the metal detunes the antenna. On-metal tags solve this with a spacer or ferrite layer that isolates the antenna from the metallic substrate. These specialised tags, used heavily in manufacturing, defence, and IT asset management, are among the most durable available. With ruggedised housings rated to IP68 or higher, on-metal tags can endure extreme temperatures, vibration, and chemical exposure for 15 to 20 years.

Accelerated Aging and Read Performance

Manufacturers validate tag lifespan through accelerated aging tests that simulate years of environmental stress in compressed timeframes. These protocols expose tags to elevated temperatures, humidity cycling, UV radiation, and mechanical shock. Read sensitivity and range are measured at intervals throughout the process. Most high-quality tags show minimal degradation in read distance during the first 70 to 80 percent of their rated lifespan, followed by a gradual decline. For mission-critical deployments, establishing a replacement schedule well before end-of-life thresholds is essential to maintaining system reliability.

Choosing the right tag for the environment is just as important as choosing the right frequency or IC. Matching form factor and construction to the application’s physical demands ensures that RFID investments deliver reliable performance across their full intended lifespan.

The post RFID Tag Durability: How Long Do Tags Actually Last? first appeared on RFID News.

Brooks Running, the Seattle-based athletic footwear brand, has eliminated shipping errors at its primary U.S. distribution centre after deploying an RFID-powered inventory intelligence solution from Sensormatic Solutions. The implementation has delivered a step-change in supply chain visibility, giving the company end-to-end control over its outbound fulfilment process.

At the heart of the deployment is Sensormatic’s TrueVUE Cloud platform, which gives Brooks a real-time picture of inventory movement from the moment product is tagged through to the point of shipment. On-demand RFID label printing and encoding is built into the workflow, and mobile RFID readers replace the need for fixed workstations on the floor, keeping operations flexible and scalable.

The results have been significant. Brooks is now achieving 100% accuracy across all picked and packed items leaving the facility. RFID scanning runs 26 times faster than the manual barcode processes it replaced, and automated shipping audits flag discrepancies in real time, allowing staff to correct mistakes before an order ever leaves the building. The knock-on effect has been a substantial drop in customer chargebacks, a persistent pain point for brands supplying major retail partners where compliance requirements are strict.

Steve LeClerc, Director of Distribution at Brooks Running, was direct about the business impact: “The speed and accuracy, along with the data we capture for accurate shipments, have been amazing.” That kind of feedback reflects what good RFID integration looks like in practice, where the technology becomes part of the daily operational rhythm rather than a bolt-on reporting tool.

Prior to the Sensormatic deployment, Brooks needed a solution that could be rolled out rapidly across the entire distribution centre without disrupting throughput. The brief was straightforward: make sure what ships matches exactly what was ordered. Sensormatic’s answer was an end-to-end system that ties together source tagging, mobile reading infrastructure, and API-level integration with Brooks’ existing warehouse management system. Every outbound shipment now has a complete digital audit trail attached to it.

From a supply chain technology standpoint, this deployment is a solid example of UHF RAIN RFID being used where it delivers genuine operational value rather than simply adding item-level data for its own sake. The combination of cloud-based visibility software, mobile readers, and tight WMS integration addresses the real-world complexity of a busy distribution centre without requiring a full infrastructure overhaul.

For other footwear and apparel brands managing high-volume outbound fulfilment, the Brooks Running case makes a clear argument for RFID at the distribution centre level. Shipping accuracy directly affects retailer relationships, chargeback costs, and brand reputation. When those three factors are all in play, the return on investment for a properly implemented RFID solution tends to justify itself quickly.

Sensormatic Solutions continues to expand its retail and supply chain RFID portfolio, and the Brooks partnership adds another data point to the growing evidence base for item-level RFID in athletic and performance footwear distribution.

Read more at https://www.sensormatic.com/Resources/cs/2026/Brooks-Case-Study

The post Sensormatic Solutions’ RFID delivers gains in Supply Chain Visibility and eliminates shipping errors at Brooks Running distribution centre. first appeared on RFID News.

The first thing to assess is domain expertise. RFID is not a one-size-fits-all technology. A provider with deep experience in your specific sector, whether that is logistics, healthcare, retail, or manufacturing, will understand the operational challenges you face. Ask for case studies and reference projects in your industry. A strong provider should be able to demonstrate measurable results from past deployments, such as improved inventory accuracy, reduced shrinkage, or faster throughput at dock doors.

Technology partnerships matter more than many buyers realise. The best providers maintain close relationships with leading hardware manufacturers like Zebra, Impinj, and NXP. These partnerships ensure access to the latest reader firmware, chip technologies, and antenna designs. They also mean the provider can offer informed guidance on choosing between UHF RAIN RFID for supply chain applications, HF for ticketing and access control, or NFC for consumer engagement and product authentication.

Integration capability is another critical factor. Your RFID system will need to talk to existing enterprise software, from ERP and WMS platforms to point-of-sale systems and cloud databases. A capable provider will have pre-built connectors or middleware experience that reduces development time and risk. Ask about their approach to API integration, data formatting, and how they handle edge cases like missed reads or duplicate tag events.

The support model deserves careful scrutiny. RFID deployments rarely end at go-live. Tags degrade, environments change, and business requirements evolve. Look for providers that offer tiered support packages, proactive monitoring, and clear SLAs for response times. On-site support capability is especially important for large-scale deployments where hardware issues can halt operations.

Finally, watch for red flags. Be cautious of providers who push proprietary hardware that locks you into their ecosystem. Steer clear of those who cannot provide references or who promise unrealistic read rates without conducting a site survey first. A reputable provider will always recommend a proof-of-concept phase and will be transparent about the limitations of the technology in your specific environment.

Vague pricing structures are another warning sign. A trustworthy partner will break down costs clearly, covering hardware, software licensing, integration, training, and ongoing support. If a quote feels too good to be true, it probably is, and hidden costs will surface later in the project.

Choosing an RFID solutions provider is a strategic decision. Take the time to evaluate expertise, partnerships, integration skills, and support offerings. The right partner will not just deliver technology; they will help you build a foundation for long-term operational improvement.

The post How to Choose an RFID Solutions Provider: A Buyer’s Guide first appeared on RFID News.

At the heart of this collaboration are two innovative tags developed by Paragon ID, both of which operate without batteries and remove one of the biggest barriers to deploying tracking at scale.

The standout device is the XgenTag-R, which harvests energy directly from UHF RFID fields. This tag activates within 20 metres of standard UHF readers, drawing power from the RF energy already present in the environment. This makes it particularly well suited for tracking assets that are enclosed, hidden from view, or stored in areas where light-based energy harvesting is impractical. The ability to power a sensor and transmit data using nothing more than ambient UHF energy is a genuinely innovative approach. It means organisations can collect data on a massive scale without worrying about battery life, replacement schedules, or the environmental cost of disposable power sources. The potential applications are enormous, from monitoring thousands of pallets in a warehouse to tracking surgical instruments inside hospital storage units.

Alongside the UHF-powered tag, Paragon ID has also developed the XgenTag-L, a Bluetooth Low Energy (BLE) tag that harvests ambient light through organic photovoltaic surfaces. It transmits a signal once per second under normal lighting conditions and can still function in near-darkness at just 5 lux. The designed operational life exceeds ten years, again without any battery replacement. Both tags combine location tracking with basic sensing capabilities, including temperature monitoring.

What makes this partnership particularly interesting is the network side. Nodle’s ConnectX platform turns millions of participating smartphones into passive relay infrastructure. When an XgenTag broadcasts its BLE beacon, nearby phones running the Nodle app capture the signal, determine location data, and relay the information back to the cloud. Users earn NODL tokens for their participation. This crowdsourced approach eliminates the need for dedicated gateway hardware or cellular contracts, dramatically reducing the cost of deploying tracking across wide areas.

The use of UHF RF energy to power sensors and collect data at scale could prove transformative across several sectors. In logistics, it enables real-time visibility of pallets, containers, waste bins, and kegs. In healthcare, it supports tracking of surgical instruments and pharmaceutical shipments where maintaining cold chain integrity is critical. Construction firms can monitor scaffolding and tools across sprawling sites, while aviation operators can track baggage carts and unit load devices on airport aprons.

Field trials are already underway across three continents. In France, deployments are running at a logistics facility in Albi and at Nice Airport. Trials are also active in South America, covering Santiago and Sao Paulo, as well as in Africa.

As UHF RFID infrastructure continues to expand globally, the ability to piggyback sensor-equipped tags onto existing reader networks represents a significant step forward. Rather than building entirely new tracking systems, organisations can layer intelligence onto infrastructure they already have, collecting environmental and location data without additional power sources or connectivity costs.

Read more at https://www.paragon-id.com/en/inspiration/nodle-and-paragon-id-join-forces-to-redefine-what-can-be-tracked

The post Nodle and Paragon ID join forces to redefine what can be tracked first appeared on RFID News.