ISO published a second edition of ISO/TR 17329 on 12 November 2026, updating the register that records which RFID manufacturer code belongs to which gas cylinder maker. The document runs to 30 pages and is titled “Gas cylinders - Identification of gas cylinder manufacturer marks and their assigned radio frequency identification (RFID) codes”. It replaces the 2015 first edition.
ISO, the International Organization for Standardization, is the Geneva-based body that publishes international standards across most industries, and it issues several classes of document. A Technical Report is not one you comply with: it carries information rather than requirements, so there is nothing in ISO/TR 17329 to conform to and nothing to certify against. It records. Its Annex A is a country-by-country list of gas cylinder manufacturers and the RFID manufacturer code each one has been assigned.
How a cylinder manufacturer code is built
The codes come from ISO 21007, the two-part standard that defines how RFID identification is applied to gas cylinders and their contents. Part 1, ISO 21007-1:2005, sets the reference architecture and terminology, and was confirmed as current in an ISO review in 2024; it covers the data element structure only, with the air interface and the equipment outside its scope. Part 2 sets the numbering schemes, with editions dated 2013 and 2015. ISO/TR 17329 itself names no frequency, tag type or reader specification.
The code has a fixed shape:
- Three digits: the ISO 3166-1 numeric code for the manufacturer’s country.
- Two digits: a sequence number allocated within that country.
- Once assigned, the code never changes.
That permanence is the design intent. A gas cylinder is a reusable, high-value, safety-critical asset that circulates for decades between filler, distributor and end user, and the manufacturer identity is the root of everything else recorded against it: test dates, ownership, fill history, retirement. Regulations already require a cylinder to carry its maker’s name or trademark, stamped on metal shells or labelled on composites. The RFID code is the machine-readable form of that obligation, and is normally specific to one production site.
The register deliberately keeps companies that no longer exist
Annex A includes manufacturers that ceased production long ago, by design: their cylinders can still be in service and still need to be identified. The code outlives the company that earned it, an unusual property in industrial identification and a sensible one when the tagged object has a working life measured in decades. The list is not exhaustive and is valid only at its stated date.
The data in the new edition is described as current as of 30 April 2024, roughly two and a half years old on the day of publication. Requests for a new or amended code go to the ISO/TC 58/SC 4 secretariat, which updates Annex A after consulting the committee leadership, so the register is revised in batches rather than continuously. Anyone matching a code read off a cylinder against the published list should expect recent allocations to be missing. The only substantive change from the 2015 edition is the removal of Annexes B and C.
What could not be confirmed
Publication of the second edition could not be independently verified at the time of writing. The account above rests on the catalogue entry for ISO/TR 17329:2026 and on a final draft stating that it cancels and replaces the technically revised 2015 edition. National standards bodies were still listing the first edition as current: BSI’s catalogue carried PD ISO/TR 17329:2015, published 30 November 2015, with a status of current and under review, and Czech and Swedish resellers likewise listed only the 2015 text. ISO’s own catalogue page for the new entry had been seen showing it in final production. Check availability with your national standards body before ordering.
Why an RFID audience should care
The interesting thing about this document is who owns it. It comes from ISO/TC 58/SC 4, the subcommittee covering operational requirements for gas cylinders, and from its working group WG 6 on cylinder identification. It does not come from ISO/IEC JTC 1/SC 31, the committee responsible for automatic identification and data capture, nor from TC 122 on packaging. Issuer identity here is assigned centrally, by a committee of cylinder people, in a document the RFID industry has no hand in.
That inverts retail and logistics, where a manufacturer buys a company prefix from a numbering organisation and encodes it itself. Here the number is granted rather than bought, and published as a reference list rather than held in a commercial database. For anyone selling tags, readers or software into the industrial gas trade, the identity layer is settled: the job is reading and writing a scheme someone else maintains. More on the standards shaping deployments is in our ISO Standards coverage, and the terms used here are defined in the RFID glossary.

