A corrosion sensor built as a passive RFID sticker has come through its first outdoor trial, in a US Navy experiment at the Port of Hueneme, California, between June and October 2026.
The sensor is OxidEyes, from AmbientSense Technologies Inc. of Portland, Oregon, and it began as a naval engineer’s initial design for a low-cost sensor. The Navy’s account says the technology uses passive radio frequency identification stickers to monitor atmospheric corrosion trends, attributing that description to the company’s website. The trial sat inside Event Kilo, part of this year’s Coastal Trident series of Advanced Naval Technology Exercises, ANTX-CT26, hosted at Naval Surface Warfare Center, Port Hueneme Division.
Scanned, not streamed
Passive carries its usual RFID meaning here: no battery, no transmitter of its own. The sticker draws power from an interrogating reader and answers only while that reader is present, so a reading exists when somebody takes one. Brian McInnis, AmbientSense co-founder and chief technology officer, put the appeal this way: “our sensors would be equipped with RFID so they also serve as transmitters that don’t need a separate battery and don’t have an active signal coming off of them.”
Corrosion monitoring therefore belongs with the RFID sensing applications read on an inspection round rather than reporting continuously; the RFID News glossary defines passive, semi-passive and active tags.
Three wires, 25 feet from the water
McInnis set the samples up in June 2026 near the lighthouse at the Port of Hueneme, about 25 feet from the water. Sensors were affixed to three custom-built holders carrying bare electric wire in different thicknesses, to see whether they capture which wire breaks or fails, and when. He returned every two to three weeks to check corrosion progression and sensor readability, and the experiment wrapped up just before the Fathomwerx Summit in October 2026.
What came back is qualitative. “This is the first field test we’ve done,” McInnis said. “We’ve conducted a few lab tests in a salt-fog chamber, but lab tests don’t give the same results as field tests. In the lab tests, things are stressed in an accelerated timeline, so things will fall apart in less than a day. Some of those same components have been outside in a marine environment for a couple of months, and they are still holding up here.”
No read range, accuracy or failure-detection figures have been published. Neither the Navy nor the company states an operating frequency or band, a chip, a reader or an integrator, so none should be assumed.
An NCMS brief on the same approach
A technology brief from NCMS, the US National Center for Manufacturing Sciences, a not-for-profit research consortium, describes project 25023, “Scalable, Affordable RFID Corrosion Sensors”. It names no company, so it cannot be read as AmbientSense’s own entry, but it describes the same design, patented in a naval lab where poor monitoring led a radar chief engineer to a better solution. The sensors expose three copper wires of increasing diameter and measure resistance across them: as the wires corrode and fail, resistance rises, matching the rate of corrosion.
NCMS puts the manufactured cost at under US$5 per sensor at scale, says the first version is passive for ease of Defense Department deployment with active versions planned, and rates the work at technology readiness level 3, meaning experimental proof of concept rather than anything fielded. The next step listed is a CRADA, a cooperative research and development agreement with a federal laboratory. The brief puts Defense Department corrosion costs at US$20 billion a year, 20 per cent of all maintenance spending.
Containers before warships
McInnis said a Navy sensor is a long-term goal, but the company is early and wants commercial marine customers first: sensors inside or outside shipping containers, where public Wi-Fi can carry the signals and batteries can power them. Navy uses would come later, among them sealed electronics cabinets, where “you want to make sure the cabinet isn’t being permeated with a lot of damp, salty air”, and unmanned surface vessels left deployed for long periods. Beyond that, the ambition is machine learning that predicts corrosion and feeds maintenance schedules before systems fail.
On those NCMS numbers corrosion is an enormous problem, and the current answer is periodic human inspection. Whether a few-dollar sticker scanned every few weeks improves on that is what a first field test cannot answer.

