RFID News

News and knowledge for the RFID industry

Global WiFi operator Vision cuts router stocktakes to a seventh with metal-mount RFID tags

Vision Inc., the Tokyo-listed operator of the Global WiFi international router rental service, has cut the time it takes to count its rental fleet to roughly one seventh of what barcode scanning took, after fitting metal-compatible RFID tags to its Wi-Fi routers. The figures come from a case study published by Tentac Co., Ltd., the Tokyo tag supplier behind the system, written up from an interview with a Vision representative. Vision has published nothing itself, so this is the vendor’s account.

What Vision has to keep track of

Global WiFi rents pocket Wi-Fi routers at a flat rate for travel in more than 200 countries and regions, and inside Japan to overseas visitors. Vision maintains approximately 110,000 routers; with adapters, cables and power banks, about 300,000 items are under management. At its December 2019 peak the service handled approximately 220,000 rentals a month.

Every router needing individual tracking carried a barcode label printed with its IMEI, and staff scanned units one at a time. A monthly stocktake across three sites took approximately 70 to 80 hours, and still missed units and left discrepancies. Finding one router among roughly 40,000 meant a slow visual search. Tightly packed containers caused a second problem: the units easiest to reach went out repeatedly, so utilisation was uneven.

Shelved in 2016, restarted in 2022

Vision had looked at RFID asset management since around 2016 and shelved it. Tags for electronic devices and the systems around them were expensive then, read accuracy was a concern, and the expected return did not beat manual working. Two things changed. Tags and equipment became significantly cheaper and read better, giving a clearer return-on-investment case. And when COVID-19 removed overseas travel, rental demand temporarily fell by approximately 90%, prompting restructuring and site consolidation that left the company needing asset management it could run with minimal staff. It used the quiet period to resume detailed evaluation in 2022.

Three things drove the supplier choice: implementation and running costs, accuracy when reading many devices in bulk, and whether the supplier would engage with the company’s on-site problems. Because each router is a distinct asset even within a model, the system had to resolve individual IDs, not just model and quantity.

The tags were the easy part

Read tests showed stable reading would be impossible with routers stored as they were, because tag performance on electronics falls away when devices are packed close together or overlap. Specialised containers and dividers, produced with support from Iwaki Packs Co., Ltd., hold consistent spacing between routers to cut interference. Handhelds alone, the original plan, also over-read, picking up devices in surrounding crates as well as the target one. Aluminium shielding was tested and did not reliably confine reads; a gate with a tighter read field, customised for the site by EFTECT Co., Ltd., did. The installed kit is metal-compatible tags, RFID gates, a Toshiba Tec Corporation handheld, tag printers and a management app from Hayato Information Co., Ltd. Picking was rewritten at the same time, to replenish from the back and pick from the front, which evened out which units get rented.

Results, and what the case study leaves out

Bulk reading with the gate and handheld brought the stocktake, including preparation, down to approximately one seventh of the previous 70 to 80 hours. That was with RFID covering approximately 60% of the target items at the time of the interview, and Vision expects further gains from tying the system into goods-in and goods-out. In a search test, three people found one router among approximately 40,000 in about 30 minutes, using the gate to narrow the area and the handheld to pinpoint the unit.

Several things the case study does not give. The frequency band is stated nowhere: gates plus bulk handheld reads are consistent with UHF RAIN RFID, but that is inference from the equipment, not something the source says. There are no tag or reader model numbers, no cost figures and no go-live date. The page was last updated on 17 November 2026 and says figures reflect the time of the interview, so the work is recent, but its start is unclear. The customer quotes name no individual.

One of those quotes: “Introducing RFID gives us an opportunity to review storage methods and workflows alongside implementation, helping us improve our operations.” Vision calls the routers a first step, with power banks, other high-value items and purchasing decisions driven by utilisation data under consideration. More deployments of this kind are in our logistics section.

Read more at https://www.tentac.co.jp/en/case/case-31562/

Newsletter

Get the week in RFID, every Thursday

One email: implementations, hardware and tag launches, case studies and analysis. Free, and you can leave whenever you like.

We send one digest a week and nothing else. Unsubscribe in one click. See our privacy policy.

By Matt Houldsworth

Over 3 decades of experience in RFID, High Risk/Value Asset Management, Inspection Systems, Brand Protection Technology, Customer engagement technology, WIP management, Logistics tracking, Digital Product Passports (DPP), and Digital Twinning linked to physical products with RFID. My Veribli Tech Makes Circular Economies Work!