J:COM, Japan’s largest cable television operator, has put RFID tags on more than 9,000 items of filming equipment spread across 28 sites, and roughly halved the time its teams spend counting that kit. Across 20 of those sites, a stocktake that used to take 111 hours now takes 56.
The deployment is documented in a case study published by Hitachi Systems Engineering Services, the Japanese systems integrator whose cloud-based asset management product J:COM chose. JCOM Co., Ltd. was founded in January 1995 and reported a group total of 15,672 employees at the end of March 2025. Its production division makes programming for cable and satellite broadcast, which means it owns a great deal of camera, microphone and lighting equipment and has to know where all of it is.
Spreadsheets across 28 sites
Before the project, lending was tracked in spreadsheets. The case study is blunt about why that stopped working: the files were hard to reach from outside the office, two people could not edit them at once, and chasing return deadlines was laborious. Each site had also grown its own asset rules, so head office could not get an accurate view of what was out on loan and what had come back.
J:COM set three policies before it went looking for a system: establish common asset and lending rules across every production division site, bring consumables such as SD cards inside the scope rather than treating them as too small to track, and use technology such as RFID tags to make the day to day work more efficient.
Three factors decided the product choice. Function fit came first, and the case study singles out the ability to register frequently used groups of equipment as “set items”, which matters when a crew books a camera, its lenses and its batteries as one reservation. The others were compliance with J:COM’s security policy and cost effectiveness.
A different carrier for each kind of kit
The tagging decision is the part other asset owners should look at. Rather than standardise on one label, J:COM matched the carrier to the object:
- Ordinary RFID tags on general equipment.
- Metal-mount RFID tags on the cameras. Metal detunes a conventional tag’s antenna and can suppress the read altogether, so tags built for metal surfaces use a spacer or a ground plane to keep the antenna working against the surface.
- QR codes on small items such as USB memory sticks, where there is no room for a tag and little benefit in reading at distance. QR Code is a registered trademark of Denso Wave.
- Washable linen tags on the bibs staff wear, which have to survive the laundry.
Rollout was phased. About 2,900 items were tagged at launch and about 9,000 carry a tag or a code at the time the case study was published. Implementation work ran for about six months, and the new asset and lending operation started in March 2024.
Booking equipment from the middle of a shoot
Staff now reserve equipment in the system in advance. Lending and return are then a read, either with a handheld reader or through the app on a phone. The detail the case study highlights is that crew can reserve equipment while they are out on location, which a shared spreadsheet never allowed. Automatic email notification for overdue returns is listed as a planned next step, not something already running.
From 111 hours to 56
Stocktaking used to mean two people working as a pair, one reading from a list while the other checked the shelves by eye. A reader now bulk-reads tags within about 10 metres of where the operator is standing. Across 20 sites, the total stocktaking time fell from 111 hours to 56, a reduction of about 50 per cent.
There is a second effect the headline figure does not capture. Because the tag or the QR code identifies the item, a member of staff who cannot tell one black camera body from another by sight can still complete a count. Across 28 sites, that widens the pool of people who can do the job.
A J:COM representative, unnamed in the case study, is quoted in translation saying that bulk reading is a genuinely useful feature, identifying dozens of items in an instant, and that going back to visual stocktakes is now unthinkable. The same representative is candid about what it costs to get there: drawing up the asset rules and physically attaching the tags took a great deal of effort at the start, and the efficiency only arrives once that groundwork is done.
What the case study does not state
No operating frequency is published. A bulk read of dozens of items at about 10 metres is characteristic of UHF RAIN RFID, which is the band normally used for this kind of asset work, but Hitachi Systems Engineering Services does not state the band, so it should not be assumed. The tag and reader vendors are not named, and no cost or licence figures are given.
The shape of the result is familiar from other Japanese deployments covered here, including a drinks manufacturer that cut spare parts stocktaking from 57 hours to two and a WiFi rental operator that reduced router stocktakes to a seventh using metal-mount tags. More deployments like it are collected in the case studies and asset tracking sections, and the terminology used above is defined in the RFID glossary.
Read more at https://www.hitachi-systems-es.co.jp/casestudy/case12.html

