RFID News

News and knowledge for the RFID industry

3ALogics wins Merz deal to fight fake Ultherapy devices with dual-band NFC and UHF RFID tags across Asia-Pacific

3ALogics, a Korean fabless designer of near-field communication (NFC) chips, has signed a contract with Merz Aesthetics Asia Pacific to supply authentication tag chips and a subscription authentication platform for Ultherapy, the ultrasound skin-lifting system, across the Asia-Pacific region. The company announced the deal on 20 November 2026 and the Korean news agency Newsis reported it the same day.

Everything known about the contract comes from 3ALogics’ own statement, as reported by Newsis. At the time of writing neither Merz Aesthetics nor 3ALogics’ own newsroom had published anything on the deal, so none of it is independently confirmed.

Some standing context. “Fabless” means 3ALogics designs the silicon and has a third-party foundry build it. It has been listed on Korea’s KOSDAQ market since December 2024 (ticker 177900) and sells NFC reader and tag ICs. Merz Aesthetics is the aesthetics arm of the German group Merz Pharma GmbH & Co. KGaA, which owns the Ulthera and Ultherapy trademarks. Ultherapy is a micro-focused ultrasound platform for non-surgical skin tightening, its energy delivered through transducers, handpieces supplied separately from the console. It is those transducers that keep turning up as fakes.

One tag IC, two completely different readers

What makes this an RFID story rather than an aesthetics story is the tag. 3ALogics said it will supply a dual-band tag IC carrying an NFC interface and a UHF RFID interface on one piece of silicon. The two answer to different equipment and different people.

NFC operates at 13.56 MHz with a working range of a few centimetres. Its advantage for authentication is that the reader is already in the room: every mainstream smartphone has an NFC front end, so a clinician or patient can tap the product and get a result with no hardware to buy. UHF RFID operates in the 860 to 960 MHz band, with allocations set regionally. It reads at several metres and reads many tags in one sweep, which suits goods-in checks, distribution and stock counts. It needs a purpose-built reader, which a distributor will own and a clinic will not. The source does not state this chip’s band support, so take those figures as what NFC and UHF RFID are in general. Our explainer on why RFID does not mean UHF sets out the wider family, and the RFID glossary defines the terms.

Both interfaces on one IC lets a single tag serve the consumer-facing tap and the warehouse-facing bulk read, instead of forcing a choice between them or two tags onto one item. The pattern is not confined to medical devices: Temera’s NFC crypto tags in Poltrona Frau furniture work on the same tap-to-verify principle.

Why counterfeit Ultherapy is worth a chip contract

Counterfeit Ultherapy equipment is a documented enforcement problem in Asia rather than a hypothetical risk. In June 2026, Malaysia’s Domestic Trade and Cost of Living Ministry raided a Kuala Lumpur clinic and seized a counterfeit Ultherapy Prime unit together with 25 transducers, as reported by The Star. The clinic had not bought the device through Merz’s affiliate or its authorised Malaysian distributor, and the investigation began around October 2025 after a patient report that August.

In June 2025, Merz Aesthetics said counterfeit and refurbished transducers had appeared in Hong Kong markets, could affect treatment results and patient safety, and would keep drawing enforcement action, in a statement carried by Malay Mail. It followed that in August 2025 with an Ultherapy authenticity verification reward programme. The Philippine FDA has separately warned the public and clinics against a counterfeit Ulthera System reported by the market authorisation holder, and asked customs to block its entry.

Hence the case for tagging: a premium device, a handpiece replaced repeatedly, patients who cannot tell genuine from fake, and clinics buying through grey channels.

A chip designer selling a subscription

The second half of the contract is software. Alongside the chips, 3ALogics will provide its cloud authentication platform, Nedges (네지스), the back end a tag read is checked against. The company described the contract as the point at which its recurring-revenue subscription model becomes an actual commercial business rather than a plan.

For a fabless chip company that is a real change of shape. Silicon revenue is lumpy and tied to design wins, while a platform subscription bills monthly for as long as the customer runs the scheme. The same Newsis report gives the financial context: third-quarter revenue of KRW 5.2bn, up 62% year on year, with the operating loss over the same period narrowed to KRW 0.1bn. KRW 5.2bn is roughly GBP 2.8m at November 2026 rates, so a recurring contract with a multinational customer counts for a great deal.

The company also said it plans to push beyond healthcare into authentication for luxury goods, fashion, beauty and pharmaceuticals, and into the EU Digital Product Passport market. That is a stated future target in a forward-looking company line and nothing more: there is no Digital Product Passport element in the Merz contract as described.

What is not confirmed

The source gives no contract value, no tag volumes, no launch date, no chip part number, no list of the markets covered, and no detail on who applies the tags or where they go on the product. The only quote available is from an unnamed company official, who said the firm would provide “the safest and most trustworthy digital authentication experience” to clinicians and consumers in Asia-Pacific who use Ultherapy.

Newsletter

Get the week in RFID, every Thursday

One email: implementations, hardware and tag launches, case studies and analysis. Free, and you can leave whenever you like.

We send one digest a week and nothing else. Unsubscribe in one click. See our privacy policy.

By Matt Houldsworth

Over 3 decades of experience in RFID, High Risk/Value Asset Management, Inspection Systems, Brand Protection Technology, Customer engagement technology, WIP management, Logistics tracking, Digital Product Passports (DPP), and Digital Twinning linked to physical products with RFID. My Veribli Tech Makes Circular Economies Work!